SIP sink SIP-600-2

Order

SIP sink SIP-600-2

Заказать

Артикул:

Order

The SIP series sink is designed for the production of internal sanitary treatment of technological equipment, pipelines and containers

*It is possible to manufacture similar equipment that meets the performance and needs stated in the TOR by the customer

Specification

Volume of circulation tanks (working), m3 2x0.15
Washing pump power,kW 3
Pressure of the washing pump, MPa 0.3
Washing pump capacity, m3/h 10
Return pump power, kW 3.0
Return pump head, MPa 0.3
Return pump capacity, m3/h 10
Heating temperature of cleaning solutions (at the outlet), °C up to 60
Heating element power, kW 2x9
Heating time of the washing liquid, (no more), min 60
Total power, kW 24
Cold water of household drinking quality, pressure/flow rate 0.3 MPa/10 m3/h
Hot water - pressure/flow rate 0.3 MPa/10 m3/h
Electrical connection 380V/50Hz
Weight, kg, not more than 400
Overall dimensions, mm 1400x900x1750
Degree of protection, not lower IP65

Preparation of a working cleaning solution in working tanks (on the inner ring) or in circulation mode through the washing facility;
Sequential supply of washing liquid with its circulation in the washing circuit for a specified time (followed by the return of washing solutions to the appropriate working tanks or discharge into the drainage); heating of the solution to a set temperature in the working tank (using heating elements);
Guidance (manually) of the required concentration of working solutions in the working tank with concentration control by volumetric method;
Chemical disinfection of the washing facility in the circulation mode according to the following scheme: cold water supply to the circulation circuit (from the shop communications), manual guidance of the working disinfectant solution, circulation of the desolution through the SIP-return pump and the washing pump;
Cold and hot water supply (with recharge) of water for rinsing during a specified time for spillage (followed by discharge into the drainage) from shop communications;
Note: the concentration of the cleaning solution is controlled in a laboratory way

Circulating tank with thermal insulation, hatch, level sensors, temperature sensors, heating element block - 2 pcs;
Centrifugal washing pump, SIP-return pump;
Manual shutters;
Control panel;
Frame for fixing equipment and piping (on wheel supports)

Technological functions

Preparation of a working cleaning solution in working tanks (on the inner ring) or in circulation mode through the washing facility;
Sequential supply of washing liquid with its circulation in the washing circuit for a specified time (followed by the return of washing solutions to the appropriate working tanks or discharge into the drainage); heating of the solution to a set temperature in the working tank (using heating elements);
Guidance (manually) of the required concentration of working solutions in the working tank with concentration control by volumetric method;
Chemical disinfection of the washing facility in the circulation mode according to the following scheme: cold water supply to the circulation circuit (from the shop communications), manual guidance of the working disinfectant solution, circulation of the desolution through the SIP-return pump and the washing pump;
Cold and hot water supply (with recharge) of water for rinsing during a specified time for spillage (followed by discharge into the drainage) from shop communications;
Note: the concentration of the cleaning solution is controlled in a laboratory way

Washing regulations

Installation composition

Circulating tank with thermal insulation, hatch, level sensors, temperature sensors, heating element block - 2 pcs;
Centrifugal washing pump, SIP-return pump;
Manual shutters;
Control panel;
Frame for fixing equipment and piping (on wheel supports)

Design features

YOU HAVE TASKS

WE HAVE SOLUTIONS

Our contacts

Address: