Single screw conveyor

Order

Заказать

Артикул:

Order

Screw (screw) conveyor is designed for the movement of bulk and pasty materials in the food industry

The use of a screw conveyor in technological lines can significantly improve the quality of products, minimize the mutual influence of atmospheric air and the transported product

*It is possible to manufacture similar equipment that meets the performance and needs stated in the TOR by the customer

Features and technical parameters
Optional

The screw conveyor is a pipe (tray) made of stainless steel AISI 304/316 with a specified diameter, inside which a screw made of stainless steel AISI 304/316 rotates, moving the transported product. The torque is transmitted to the screw by an electric motor through a worm gear. It is possible to equip the conveyor with a tilt angle adjustment mechanism from 0 to 45°. The maximum transportation distance is up to 10 meters. The conveyor is built into the production line by means of flange connections;
The high quality of the screw processing and the minimum gap between it and the housing ensure high system performance;
Bearing/connecting assemblies are completely protected from contact with the transported product;
Type of transportation of raw materials pulling or pushing;
There is a system of protection against unforeseen situations, emergency shutdown

Equipping the conveyor with reverse mode;
Equipping the conveyor with frequency converters;
Оequipping the conveyor with wheels with a locking mechanism, which provides it with mobility and makes it possible to move the conveyor from one section to another;
If it is necessary to heat or cool the incoming product, the housing of the single-screw conveyor can be equipped with a special jacket, and the shaft and screw are made complete to supply them with a coolant or cooling brine

Features and technical parameters

The screw conveyor is a pipe (tray) made of stainless steel AISI 304/316 with a specified diameter, inside which a screw made of stainless steel AISI 304/316 rotates, moving the transported product. The torque is transmitted to the screw by an electric motor through a worm gear. It is possible to equip the conveyor with a tilt angle adjustment mechanism from 0 to 45°. The maximum transportation distance is up to 10 meters. The conveyor is built into the production line by means of flange connections;
The high quality of the screw processing and the minimum gap between it and the housing ensure high system performance;
Bearing/connecting assemblies are completely protected from contact with the transported product;
Type of transportation of raw materials pulling or pushing;
There is a system of protection against unforeseen situations, emergency shutdown

Optional

Equipping the conveyor with reverse mode;
Equipping the conveyor with frequency converters;
Оequipping the conveyor with wheels with a locking mechanism, which provides it with mobility and makes it possible to move the conveyor from one section to another;
If it is necessary to heat or cool the incoming product, the housing of the single-screw conveyor can be equipped with a special jacket, and the shaft and screw are made complete to supply them with a coolant or cooling brine

Рекомендуемые товары

Block slicer BR-500

Grinder straight automatic VP-200M

YOU HAVE TASKS

WE HAVE SOLUTIONS

Our contacts

Address: