Hygienic module MG-02

Order

Заказать

Артикул:

Order

The MG series module is installed as a disinfection barrier on the border between the "Clean" and "Dirty" zone of the production enterprise and is used for the treatment of the hands and soles of the shoes of personnel

*It is possible to manufacture similar equipment that meets the performance and needs stated in the TOR by the customer

Specification

A tool for the treatment of hands Soap solution
Bandwidth not more than 2...3 sec/person
Installed capacity,kW 0,15
Electrical connection 380V/50Hz
Weight, kg, no more 90
Overall dimensions, mm 960х1000х1000
Type of protection, not lower IP 65

Features and technical parameters

The housing of the module is made of n/AISI 304. The bath of the portals for hand treatment is made of AISI 316 stainless steel. The outer surface of the metal is subjected to additional cold abrasive treatment;
Effective hand disinfection: 1 nozzle per hand (drip dosage);
The dispenser of funds is triggered automatically when the hand is brought to the sensor located in the portal for the treatment of the hands;
Bath (recess) for installing a disinfecting mat or grate;
The module is equipped with light elements that signal the completed stages of sanitation, as well as warn about the need to replace cans with soap solution. The canisters are equipped with sensors for monitoring the level of disinfectant liquid;
The control system of the module is implemented on a programmable microcontroller. Access to the production room is provided only after passing the entire cycle of sanitary treatment;
The ability to connect the module to the enterprise PACS system

Features and technical parameters

The housing of the module is made of n/AISI 304. The bath of the portals for hand treatment is made of AISI 316 stainless steel. The outer surface of the metal is subjected to additional cold abrasive treatment;
Effective hand disinfection: 1 nozzle per hand (drip dosage);
The dispenser of funds is triggered automatically when the hand is brought to the sensor located in the portal for the treatment of the hands;
Bath (recess) for installing a disinfecting mat or grate;
The module is equipped with light elements that signal the completed stages of sanitation, as well as warn about the need to replace cans with soap solution. The canisters are equipped with sensors for monitoring the level of disinfectant liquid;
The control system of the module is implemented on a programmable microcontroller. Access to the production room is provided only after passing the entire cycle of sanitary treatment;
The ability to connect the module to the enterprise PACS system

Рекомендуемые товары

MRS-01D hand wash

Washing aprons MF-01

Sterilizer of knives SN-6

Washing chain mail gloves

YOU HAVE TASKS

WE HAVE SOLUTIONS

Our contacts

Address: