AGROPRODMASH-2023
October 10–14
We invite you to visit our booth 21С55. Pavilion 2 / Hall 1
Expocentre Fairgrounds. 123100, Moscow, Krasnopresnenskaya nab., 14
C новым годом
Equipment for the food industry
Ru / En
Request a call
8-800-444-59-43
Free in Russia
Ru / En

Hygienic module MG-04

Hygienic module MG-04
Hygienic module MG-04
Order
Hygienic module MG-04
Заказать
Артикул:
Order

The MG series module is installed as a disinfection barrier on the border between the "Clean" and "Dirty" zone of the production enterprise and is used for the treatment of the hands and soles of the shoes of personnel

*It is possible to manufacture similar equipment that meets the performance and needs stated in the TOR by the customer

Specification
  • Direction of movementexit
  • Bandwidth not more than 5...7 sec/person
  • Foot treatment brushes
  • Length of brush shafts 600 
  • Installed capacity, kW 1,2
  • Hot and cold water supply G½ 4-8 bar
  • Drain diameter 40
  • Electrical connection 380V/50Hz
  • Weight, kg, no more 200
  • Overall dimensions, mm 1684х996х1250
  • Type of protection, not lower IP 65
  • The housing of the module is made of n/AISI 304. The bath of the portals for hand treatment is made of AISI 316 stainless steel. The outer surface of the metal is subjected to additional cold abrasive treatment;
  • Effective hand disinfection: 2 nozzles per hand (fine spray). The disinfectant dispenser is triggered automatically when both hands are simultaneously brought to the sensors located in the portals for hand treatment;
  • Effective foot treatment: two rotating brushes with automatic disinfectant supply. The rotation is activated only if the sensors are triggered at the input;
  • In order to save production space, the module has a shortened base, which is achieved by understating the housing (as a consequence of the rejection of steps);
  • In order to ensure safety and injury at work, the module is designed with non-slip surfaces for personnel passage, and also has an understated housing with a minimum number of steps.;
  • The module is equipped with light elements that signal the completed stages of sanitation, as well as warn about the need to replace the cans with disinfectant solution. The canisters are equipped with sensors for monitoring the level of disinfectant liquid;
  • Система управления модуля реализована на программируемом микроконтроллере. Доступ в производственное помещение предоставляется только после прохождения всего цикла санитарной обработки;
  • The ability to connect the module to the enterprise PACS system 

  • Exit from the production room:

When passing through the module from the production room, the turnstile is blocked. After the operation of the corresponding sensor (controlling the presence of the employee's feet on the brushes), the brush ones are set in motion. At the same time, a disinfectant is applied to the brushes in the required concentration and intensive treatment of the soles of shoes is carried out. Processing of shoe soles lasts no more than 2...3 seconds, depending on the controller settings. After processing the hands and soles of the employee's shoes, the turnstile is unlocked

Features and technical parameters
  • The housing of the module is made of n/AISI 304. The bath of the portals for hand treatment is made of AISI 316 stainless steel. The outer surface of the metal is subjected to additional cold abrasive treatment;
  • Effective hand disinfection: 2 nozzles per hand (fine spray). The disinfectant dispenser is triggered automatically when both hands are simultaneously brought to the sensors located in the portals for hand treatment;
  • Effective foot treatment: two rotating brushes with automatic disinfectant supply. The rotation is activated only if the sensors are triggered at the input;
  • In order to save production space, the module has a shortened base, which is achieved by understating the housing (as a consequence of the rejection of steps);
  • In order to ensure safety and injury at work, the module is designed with non-slip surfaces for personnel passage, and also has an understated housing with a minimum number of steps.;
  • The module is equipped with light elements that signal the completed stages of sanitation, as well as warn about the need to replace the cans with disinfectant solution. The canisters are equipped with sensors for monitoring the level of disinfectant liquid;
  • Система управления модуля реализована на программируемом микроконтроллере. Доступ в производственное помещение предоставляется только после прохождения всего цикла санитарной обработки;
  • The ability to connect the module to the enterprise PACS system 
Work description

  • Exit from the production room:

When passing through the module from the production room, the turnstile is blocked. After the operation of the corresponding sensor (controlling the presence of the employee's feet on the brushes), the brush ones are set in motion. At the same time, a disinfectant is applied to the brushes in the required concentration and intensive treatment of the soles of shoes is carried out. Processing of shoe soles lasts no more than 2...3 seconds, depending on the controller settings. After processing the hands and soles of the employee's shoes, the turnstile is unlocked

Рекомендуемые товары
Hygienic module MG-04
YOU HAVE TASKS
WE HAVE SOLUTIONS
Our partners
Our contacts
Address:
Yaroslavl
Industrial highway, 26A
Ask question
Загрузка карты ...