Platform scales VP-800

Order

Заказать

Артикул:

Order

Specification

Accuracy class according to GOST OIML R 76-1–2011 III
Maximum load (Max), kg 800
The calibration interval of the weights е and the actual division price d, (e=d), кг 0,2
Number of return intervals (n) 3000
Electrical power supply parameters, V/Hz 220/50
The interval between turns, years 1
L×W of scales, with one ramp, mm, no more 1380х1584
L×W scales, with two ramps, mm, no more 1380х1948
Overall dimensions of the platform (L×W×C), mm, no more 1380х1631х129
Weight of scales with one ramp, kg, not more than 223
Weight of scales with two ramps, kg, not more than 250
The height of the working areas of the GPU above sea level, mm 55

Advantages and design features

The body of the scale is made of high-quality AISI 304 stainless steel, the outer surface is additionally subjected to cold abrasive treatment;
The load cell body is made of stainless steel, which allows long-term operation of these sensors in aggressive food production environments. The body material of the weighing terminal is stainless steel AISI 304;
The weighing terminal uses a touchscreen display, which is made in a stainless steel case and has a degree of protection of IP65. The degree of protection of the load cells is IP68 and the sensor matching unit is IP66;
The possibility of weighing cargo with wheel supports (process trolleys, frames with sausage products, hydraulic trolleys (Rocla));
The ramp for rolling up trolleys has a length of 364 mm, which is convenient when using scales in cramped conditions. When installing two ramps, it is possible to use scales as passageways;
Low level of the weight platform (55 mm), no need for installation in the pit;
The ability to connect peripheral devices to the weighing terminal;
The design of the weighing platform is made on a floating self-centering suspension with safety stops, which protects the weight sensors from damage. The base of the suspension is fixed to the floor with anchor bolts, this allows you to avoid moving (shifting) the scales during side impacts;
The operating temperature of the scales is from -30 to +40 °C. The scales can be installed in low-temperature chambers. The operating temperature of the weighing terminal is from +5 to +40 °C;
The terminal can be installed on the wall surface or on a rack (included in the package) attached to the base of the weighing platform. It is possible to embed a special model of the weighing terminal into the customer's control panel

Advantages and design features

The body of the scale is made of high-quality AISI 304 stainless steel, the outer surface is additionally subjected to cold abrasive treatment;
The load cell body is made of stainless steel, which allows long-term operation of these sensors in aggressive food production environments. The body material of the weighing terminal is stainless steel AISI 304;
The weighing terminal uses a touchscreen display, which is made in a stainless steel case and has a degree of protection of IP65. The degree of protection of the load cells is IP68 and the sensor matching unit is IP66;
The possibility of weighing cargo with wheel supports (process trolleys, frames with sausage products, hydraulic trolleys (Rocla));
The ramp for rolling up trolleys has a length of 364 mm, which is convenient when using scales in cramped conditions. When installing two ramps, it is possible to use scales as passageways;
Low level of the weight platform (55 mm), no need for installation in the pit;
The ability to connect peripheral devices to the weighing terminal;
The design of the weighing platform is made on a floating self-centering suspension with safety stops, which protects the weight sensors from damage. The base of the suspension is fixed to the floor with anchor bolts, this allows you to avoid moving (shifting) the scales during side impacts;
The operating temperature of the scales is from -30 to +40 °C. The scales can be installed in low-temperature chambers. The operating temperature of the weighing terminal is from +5 to +40 °C;
The terminal can be installed on the wall surface or on a rack (included in the package) attached to the base of the weighing platform. It is possible to embed a special model of the weighing terminal into the customer's control panel

YOU HAVE TASKS

WE HAVE SOLUTIONS

Our contacts

Address: