Grinder corner automatic VU-200M

Order

Заказать

Артикул:

Order

The top of the VU-M series is designed for grinding fresh meat and meat products, as well as frozen meat up to -18 ° C, pre-crushed on a block cutter or block chopper to pieces of no more than 1 kg

*It is possible to manufacture similar equipment that meets the performance and needs stated in the TOR by the customer

Specification

Diameter of the cutting tool, mm 200
Cooling capacity 5 mm, kg/h up to 9000
Hopper volume, l 375
Cutting system +
Drive power of the feed screw, kW 4
Power of the working screw drive, kW 40/58
Weight, kg, no more 1850
Electrical connection 380V/50Hz
Overall dimensions, mm 1600х1800х1750
Degree of protection, not lower IP 65

The equipment is made entirely of AISI 304 stainless steel, which meets the hygienic and sanitary-epidemiological requirements for food production. The outer surface of the metal is subjected to additional cold abrasive treatment;
The augers are made of solid stainless steel, high rotation accuracy;
The drive elements are in a closed machine body, which gives optimal protection from contamination. Degree of protection of sensors and electronic components – IP 69;
The drive of the feeding screw is carried out from electric motors equipped with frequency converters;
The drive of the working screw, depending on the modification, is carried out from a single/two-speed electric motor (can be equipped with a frequency converter);
The temperature of the processed raw materials is up to -18° (after the block cutter/shredder);
The adjustable speed of the working screw allows you to optimize the work of the spinning top for a specific type of raw material;
Automatic overload protection – the feed screw does not load the worker by more than 80%;
Reverse rotation of the feed screw;
Holes are provided in the body of the spinning top for CIP-washing of hard-to-reach places of the working screw cavities;
For easy cleaning, the feed screw is pushed horizontally from the side, there is no need for its laborious disassembly through the upper part of the housing

The raw meat loaded into the receiving hopper is transported by a feeding auger to the working auger and then, with the help of a working auger, is forced through a system of fixed grids and rotating knives;
The desired degree of grinding is obtained by installing gratings with the appropriate hole diameter. The crushed raw materials are unloaded into a processing trolley

The cutting tool consists of: a receiving grate, grates with a hole diameter of 5, 8 and 18 mm, two cross-shaped knives for fresh meat, two cross-shaped knives with a remote ring for frozen meat, a crosspiece;
To facilitate the installation of the feeding screw in the working position, the top is equipped with a lifting device installed on board the loading funnel of the top;
To facilitate the washing of the top, the neck of the working screw is made reclining. In the working position, the neck is fastened with a clamp;
A protective casing equipped with an electromagnetic lock that prevents the opening of the casing when the top is running;
For storage and transportation of working and feeding screws and cutting tools, the top is equipped with special trolleys

Acquisition of loading/unloading conveyors;
Mast loading device

The drive of the working screw includes a bearing assembly and a gear belt transmission;
The drive of the feed screw consists of a gear motor and a bearing assembly installed in a removable cover;
At the end of the working screw, a shank is installed that transmits rotation to the knives of the cutting kit;
The cylinder of the working screw consists of a housing and a sleeve and has a spiral-shaped thread on the inner surface;
A locking nut is used to fix the cutting kit;
The lid in the closed state comes into contact with the limit switch that blocks the rotation of the screws when the lid is removed;
To push out the working screw, a hydraulic ejector is provided, which includes a one-way hydraulic cylinder with a spring return, built into the drive shaft of the working screw, a rotary joint, a high-pressure hose, a hydroelectric station with installed hydraulic equipment;
The protective casing is equipped with an electromagnetic lock that prevents the casing from opening when the top is running;
The emergency switch stops the spinning top in contact with the frame;
The footrest interacts with the limit switch, which does not allow the spinning top to start up when the footrest is folded back;
Electrical control system – built-in electrical cabinet

Features and technical parameters

The equipment is made entirely of AISI 304 stainless steel, which meets the hygienic and sanitary-epidemiological requirements for food production. The outer surface of the metal is subjected to additional cold abrasive treatment;
The augers are made of solid stainless steel, high rotation accuracy;
The drive elements are in a closed machine body, which gives optimal protection from contamination. Degree of protection of sensors and electronic components – IP 69;
The drive of the feeding screw is carried out from electric motors equipped with frequency converters;
The drive of the working screw, depending on the modification, is carried out from a single/two-speed electric motor (can be equipped with a frequency converter);
The temperature of the processed raw materials is up to -18° (after the block cutter/shredder);
The adjustable speed of the working screw allows you to optimize the work of the spinning top for a specific type of raw material;
Automatic overload protection – the feed screw does not load the worker by more than 80%;
Reverse rotation of the feed screw;
Holes are provided in the body of the spinning top for CIP-washing of hard-to-reach places of the working screw cavities;
For easy cleaning, the feed screw is pushed horizontally from the side, there is no need for its laborious disassembly through the upper part of the housing

Work description

The raw meat loaded into the receiving hopper is transported by a feeding auger to the working auger and then, with the help of a working auger, is forced through a system of fixed grids and rotating knives;
The desired degree of grinding is obtained by installing gratings with the appropriate hole diameter. The crushed raw materials are unloaded into a processing trolley

Completeness

The cutting tool consists of: a receiving grate, grates with a hole diameter of 5, 8 and 18 mm, two cross-shaped knives for fresh meat, two cross-shaped knives with a remote ring for frozen meat, a crosspiece;
To facilitate the installation of the feeding screw in the working position, the top is equipped with a lifting device installed on board the loading funnel of the top;
To facilitate the washing of the top, the neck of the working screw is made reclining. In the working position, the neck is fastened with a clamp;
A protective casing equipped with an electromagnetic lock that prevents the opening of the casing when the top is running;
For storage and transportation of working and feeding screws and cutting tools, the top is equipped with special trolleys

Optional

Acquisition of loading/unloading conveyors;
Mast loading device

Advantages and design features

The drive of the working screw includes a bearing assembly and a gear belt transmission;
The drive of the feed screw consists of a gear motor and a bearing assembly installed in a removable cover;
At the end of the working screw, a shank is installed that transmits rotation to the knives of the cutting kit;
The cylinder of the working screw consists of a housing and a sleeve and has a spiral-shaped thread on the inner surface;
A locking nut is used to fix the cutting kit;
The lid in the closed state comes into contact with the limit switch that blocks the rotation of the screws when the lid is removed;
To push out the working screw, a hydraulic ejector is provided, which includes a one-way hydraulic cylinder with a spring return, built into the drive shaft of the working screw, a rotary joint, a high-pressure hose, a hydroelectric station with installed hydraulic equipment;
The protective casing is equipped with an electromagnetic lock that prevents the casing from opening when the top is running;
The emergency switch stops the spinning top in contact with the frame;
The footrest interacts with the limit switch, which does not allow the spinning top to start up when the footrest is folded back;
Electrical control system – built-in electrical cabinet

Рекомендуемые товары

The device is a loading mast of the UZM series

Technological capacity ET-200

Cutting tool for tops

YOU HAVE TASKS

WE HAVE SOLUTIONS

Our contacts

Address: